Description
Honeywell Sensepoint XCD ATEX Transmitter SPXCDASMG1 Industrial Gas Detectors
Description
Brand :
Honeywell
Model :
SPXCDASMG1
Product type :
Sensepoint XCD Fixed Industrial Gas Detectors
Hydrogen:
0-1000ppm
Transmitter P/N :
SPXCDASMTXT
Sensor P/N:
SPXCDXSG1SS
SPXCD :
Sensepoint XCD
A - Certification :
ATEX/IECEx/KTL/PA and GB
S - Enclosure Material :
Stainless Steel
M - Entry :
M20 (ATEX/IIECEx)
G - Sensor type :
Hydrogen
1 - Gas Range :
Fixed
Shipping weight :
8 Kg
Sensepoint XCD Detector ATEX/IECEx/KTL, PA & GB (Aluminium LM25)
SPXCDALMFX ATEX/IECEx/KTL/PA and GB approved SP XCD Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, M20 Entry
SPXCDALMRX ATEX/IECEx/KTL/PA and GB approved SP XCD (Methane) IR 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, M20 Entry
SPXCDALMPX ATEX/IECEx/KTL/PA and GB approved SP XCD (Propane) IR 0-100%LEL (20 to 100%LEL, 10%LEL) with LM25, M20 Entry
SPXCDALMO1 ATEX/IECEx/KTL/PA and GB approved SP XCD Oxygen 25.0%/Vol. with LM25, M20 Entry
SPXCDALMHX ATEX/IECEx/KTL/PA and GB approved SP XCD Hydrogen Sulphide 0-50.0ppm (10.0 to 100.0ppm, 1.0ppm) with LM25, M20 Entry
SPXCDALMCX ATEX/IECEx/KTL/PA and GB approved SP XCD Carbon Monoxide 0-300ppm (100-1000ppm, 100ppm) with LM25, M20 Entry
SPXCDALMG1 ATEX/IECEx/KTL/PA and GB approved SP XCD Hydrogen 0-1000ppm with LM25, M20 Entry
SPXCDALMNX ATEX/IECEx/KTL/PA and GB approved SP XCD Nitrogen Dioxide 0-50.0ppm (10.0-50.0, 5.0ppm) with LM25, M20 Entry
SPXCDALMB1 ATEX/IECEx/KTL/PA and GB approved SP XCD Carbon Dioxide IR 0-2.00%Vol. with LM25, M20 Entry
Sensepoint XCD Detector ATEX/IECEx/KTL, PA & GB (316 Stainless Steel)
SPXCDASMFX ATEX/IECEX and AP approved SP XCD Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL) with 316SS, M20 Entry
SPXCDASMRX ATEX/IECEX and AP approved SP XCD (Methane) IR 0-100%LEL (20 to 100%LEL, 10%LEL) with 316SS, M20 Entry
SPXCDASMPX ATEX/IECEX and AP approved SP XCD (Propane) IR 0-100%LEL (20 to 100%LEL, 10%LEL) with 316SS, M20 Entry
SPXCDASMO1 ATEX/IECEX and AP approved SP XCD Oxygen 25.0%/Vol. with 316SS, M20 Entry
SPXCDASMHX ATEX/IECEX and AP approved SP XCD Hydrogen Sulphide 0-50.0ppm (10.0 to 100.0ppm, 1.0ppm) with 316SS, M20 Entry
SPXCDASMCX ATEX/IECEX and AP approved SP XCD Carbon Monoxide 0-300ppm (100-1000ppm, 100ppm) with 316SS, M20 Entry
SPXCDASMG1 ATEX/IECEX and AP approved SP XCD Hydrogen 0-1000ppm with 316SS, M20 Entry
SPXCDASMNX ATEX/IECEX and AP approved SP XCD Nitrogen Dioxide 0-50.0ppm (10.0-50.0, 5.0ppm) with 316SS, M20 Entry
SPXCDASMB1 ATEX/IECEX and AP approved SP XCD Carbon Dioxide IR 0-2.00%Vol. with 316SS, M20 Entry
Optional Accessories
S3KCAL Calibration cup
SPXCDCC Collecting cone for use with lighter than air gases
SPXCDDMK Duct mounting kit
SPXCDHMANEN Hard copy manual in English
SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets)
SPXCDSDP Sunshade/Deluge Protection
00780-A-0100 ATEX approved junction box (Explosion-proof)
Spare XCD Sensors (316 Stainless Steel)
SPXCDXSFXSS Flammable CAT 0-100%LEL (20 to 100%LEL, 10%LEL)
SPXCDXSRXSS Methane IR 0-100%LEL (20 to 100%LEL, 10%LEL)
SPXCDXSPXSS Propane IR 0-100%LEL (20 to 100%LEL, 10%LEL)
SPXCDXSO1SS Oxygen 25.0%/Vol. only
SPXCDXSHXSS Hydrogen Sulphide 0-50.0ppm (10.0 to 100.0ppm, 1.0ppm)
SPXCDXSCXSS Carbon Monoxide 0-300ppm (100-1000ppm, 100ppm)
SPXCDXSG1SS Hydrogen 0-1000ppm only
SPXCDXSN1SS Nitrogen Dioxide 0-50.0ppm (10.0-50.0ppm, 5.0ppm)
SPXCDXSB1SS Carbon Dioxide IR 0-2.00%Vol. only
Sensepoint XCD Overview
There are three different types of the XCD transmitter for use with three different families of sensors.
The mV type transmitter is for use with the mV family of XCD sensors including catalytic sensors to detect flammable gases in the range 0-100%LEL and infrared (IR) sensors for detection of Hydrocarbon gases in the range 0-100%LEL. Two IR Hydrocarbon sensors are available; one linearised to Methane and one linearised to Propane. The Propane version has linear cross sensitivities factors for Ethylene, Butane and Pentane. There is also an IR CO2 sensor available in the range 0-2%Vol.
The EC type transmitter is for use with the EC family of XCD sensors including Carbon Monoxide (CO), Hydrogen Sulphide, (H2 S), Nitrogen Dioxide (NO2 ) and Hydrogen (H2 ).
The Oxygen transmitter is for use with the Oxygen (O2 ) XCD sensors. A transmitter can auto-recognise any sensor from within its sensor family.
The sensor simply plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly
Benefit
Flammable, toxic and
Oxygen gas detector for
industrial applications
The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.
Picture:
Related Products
